ELI® is a light and elegant Internal Partition Wall with transparent single-glass. It´s a high-tech and extremely stylish partition designed to create any type of interior environment.
About ELI®
The partition wall system ELI® can be used in areas where no visual barriers are required and where transparency needs to be accentuated since the system’s main feature is the minimalism. The system enhances any environment and with its elegance and its flexibility allows to reconfigure interior spaces in a short time.
Indeed all the ELI® modules are easily and quick interchangeable without the integration of additional materials or accessories, and it is also possible to interchange the fixed modules with swing or sliding operable vents/doors.
The system consists of two aluminum rails, upper and lower, where the infill panels are accommodated, both with glass or opaque panels with a wide choice of option. The joint between the glass is done with minimal aluminum profile perfectly coplanar with the surface. The particular mirror-like finish gives an elegant horizontal rhythm without impacting on the lightness of the system. These joint profiles also accommodate special adhesive gaskets to ensure the necessary proof for a perfect acoustic compartment.
Aluminum Profiles System
Aluminum profiles are 6063-T6 alloy as per ASTM B221 norms .
The total dimension is 1 38” x 1 38”.
The hinged swing door is all-glass without aluminum frame and can be provided either without noise isolation (glass-glass) and with proof aluminum profile with acoustic gaskets.
If necessary the system can accommodate elegant technical modules of extruded aluminum with removable walls to accomodate electric or signal cables. These modules can be placed next to the doors for the combined use of signage, lighting switch and touch screen panels to control all client needs. (see section optional)
Modules Configuration
The standard maximum dimension of the modules is 10’5 ” height and 5″ width, but it is also possible to design customized walls with higher glazing or panels previously consulting the company technical department. Doors can be single or double swing operable or full height sliding. It’s possible to use alternative opaque materials instead of glass (see optionals) – maximum dimensions should be checked with the company technical department.
TOLERANCES
The system allows to tolerate the following dimensional errors: Floor level and ceiling errors: +/- 3/16″. Slab deflection after installation: +/-3/16″.
SURFACE TREATMENTS
Aluminum profiles can be treated either with anodic coating and anodizing.
ACCESSORIES
All accessories have been developed and designed in order to be integrated into the system and are in compliance with the standards for prolonged use over the years, both for mechanical reasons and for prolonged contact surfaces. The surface finishes can match the color of the profiles.
GASKETS
The glass, panels and doors gaskets are in transparent color silicone to be elegant and less visible as possible and not to impact the eye. The acoustic gaskets located under the base profile are mono-adhesive and foam. The brushes on the sliding doors are of prime quality ‘high density’ in light gray color in compliance with ASTM standards ASTM C 864, C 509, C 1115, E 2203.
GLASSES AND PANELS
The system can accommodate two different glass thicknesses: laminated glass A” + A” with double PVB or 1/4 + 1-4″ with double PVB. The doors glass is 25/64″ thick tempered glass or higher in relation to the size. Different types of soundproofing panels can be accommodated, for acoustic control, with different finishes in stone, wood, abs. Etc. (See cladding optionals) up to the maximum size of 1 3/8 “.
INSTALLATION
The installation of ELI partition wall, is an easy and fast procedure. Floor and ceiling surveys are needed to check the tolerances of the built situation, and can be easily done with laser instruments. Glass and infill panels are leveled inside the lower aluminum profiles with PVC plates with different thickness.
OPTIONAL
CRISTAL GLASS TILES
It is a new high-tech and aesthetic product for covering floors, walls and much more. The high-definition graphic decoration is applied using an innovative colour-transfer system derived from nano-technology. All colours are water-based, contain no solvents, and are certified as non-toxic. Colours are applied using an innovative system at a low temperature, without any environmental impact.
This industrial process offers the highest-possible degree of reliability and safety in terms of product use, thus enabling any kind of high-definition graphic decoration to be created for interior use.
LCD GLASS
This type of glass is a laminated glass in which is enclosed a crystal liquids film. The properties of liquid crystals inserted inside the glass, allow to change a traditional glass surface, from transparent to opaque. This is possible through the drive of a simple swich that in just a few milliseconds will give you the maximum privacy. The typical applications of the product are particularly useful for privacy in different locations and sectors as meeting rooms, banks, marine, hospital, hotel, private and much more.
This special glass is part of technology of films eletro–optic that could become opaque or not, thanks to an electric field. Inside the glass there is a transparent film covered by a conductive material called ito (indium tin oxide) that contains between the two surfaces a layer of lcd missing in a solid polymer matrix. When the film is in off (no voltage) the liquid crystals are not aligned so you create the matt effect, while in the state on (presence voltage) crystals are aligned and this allowing the passage of light and the vision beyond the surface. The change of state is within milliseconds.
CERAMIC PANEL
These stone panels is a newly designed environmentally ceramic tile, a decorative product that in just a few years has revolutionised the world of contemporary architecture. Its extremely thin, large size and perfect flatness are obtained thanks to exclusive innovative technology that gives elasticity and resistance. The versatily and ease of use, undeniable strenghts of these panels, together with its lightness, strenght and antimicrobial properties, have led to the success of this material that meets the requirements of consumers, planners and designers who have choosed these panels creating highly original solutions, satisfied by prestigious references worldwide.
LASER ENGRAVING
Exclusive product to achieve a particular aesthetic impact environments. Customizable glass by modifying the structure of its crystals, and therefore of natural light transmission through laser engravings in material thickness. The laser beam penetrates the glass, creating micro-cracks that, in an orderly and calculated, forming three-dimensional patterns or high resolution images. This technique, combined with illumination from the edge of the plates by means of LEDs, encourages reflection and refraction of light to make all bright and shiny form.
LED PANEL
Main substitute the backlight to “neon”, This panels is unit for the backlight and is distinguished for its innovation both technically and aesthetically. By exploiting the “edge lighting system” it is presented as a rigid panel with thickness from 8mm and customizable in size, the uniformity of light on the surface is obtained with a low use of LEDs for an optimal energy consumption and no maintenance. This panel is configurable according to the specifications of the designer who will find this product in the solution to many of the most common problems in the context of the backlight and lighting of materials and environments.
PLATED PANEL
Plated panels are units of different kind of woods, laminates, veneers, honey-comb panels where edging on shaped with the center of the work to CNC for paper, PVC, ABS or wood edges up to 3 mm. Sectioning of panels or postforming bars, by means of machines with a computerized systems for the optimization of the cutting phase in order to reduce at least the waste material.
PRODUCTS
Interiors
